CURE I.V. Set

Overview

The CURE I.V. Set is a gravity-feed administration set for delivering intravenous fluids from a bag or bottle to a patient’s IV access device. The fluid passes from the spike into a transparent drip chamber, where drops can be counted, and through clear tubing to a Luer connector. A roller clamp on the tubing controls the flow rate.

Key features

• Spike with protective cap to connect to the fluid container
• Transparent drip chamber for monitoring and counting drops
• Roller clamp to start, stop and adjust flow
• Clear, flexible tubing so fluid and air bubbles stay visible
• Luer connector with protective cap for the IV cannula
• Registered with the Drug Regulatory Authority of Pakistan (DRAP)

Applications

• Gravity infusion of intravenous fluids in wards, emergency departments and clinics
• Routine hydration and fluid replacement therapy

Packaging

• Individually packed set [confirm pack type and carton quantity]

How to use

1. Check the pack is intact, then close the roller clamp.
2. Insert the spike into the fluid container and squeeze the drip chamber to fill it partly.
3. Open the clamp to prime the line and expel air, then close it.
4. Connect the Luer end to the patient’s IV access device and set the flow with the roller clamp.
5. Use for one patient only and dispose of as clinical waste.

Storage

• Store in a cool, dry place away from direct sunlight.

Precautions

• For single use only. Do not re-sterilise or reuse.
• Do not use if the packaging is damaged.
• Make sure the line is fully primed and free of air before connecting to the patient.
• For use by trained healthcare professionals.

Always follow the instructions for use supplied with the product and your facility’s clinical protocols.