CURE I.V. Burette Set

Overview

The CURE I.V. Burette Set adds a graduated, transparent burette chamber between the fluid container and the drip chamber. A set volume is measured into the burette and delivered from there, so only that amount can reach the patient. Burette sets are used where the infused volume must be closely controlled, especially for children.

Key features

• Graduated transparent burette chamber for measuring the volume to infuse
• Drip chamber below the burette for counting drops
• Clamps to fill the burette and to control flow
• Injection site for adding medication to a measured volume
• Clear tubing with Luer connector
• Registered with the Drug Regulatory Authority of Pakistan (DRAP)

Applications

• Paediatric and neonatal infusion therapy
• Intermittent medication in a measured volume of fluid
• Any infusion where the volume must be carefully supervised

Packaging

• Individually packed set [confirm pack type and carton quantity]

How to use

1. Hang the burette vertically.
2. Close the lower clamp, open the upper clamp and fill the burette with the prescribed volume, then close the upper clamp.
3. Prime the line, connect to the IV access device and set the rate.
4. Check the flow rate regularly by counting drops. Use for one patient only.

Storage

• Store in a cool, dry place away from direct sunlight.

Precautions

• For single use only. Do not re-sterilise or reuse.
• Keep the burette vertical during use.
• Do not use if the packaging is damaged.
• For use by trained healthcare professionals.

Always follow the instructions for use supplied with the product and your facility’s clinical protocols.